I've been running 'Gummy' custom 'Ice Cream Sandwich (ICS)' ROM for a while and it has been great!!! But the urge t...


I've been running 'Gummy' custom 'Ice Cream Sandwich (ICS)' ROM for a while and it has been great!!! But the urge to move on is really unbearable!!! I've been thinking of upgrading my ROM to the newest 'Jelly Bean' which is of course custom as well (not going to run the official 'Jelly Bean' ROM)!!! The only thing holding me back is the trouble and not forgetting stability of the new ROM...



Don't want my phone to encounter any problem and causes it to malfunction... I've tested 'Jelly Bean' on my friend 'Galaxy SII' and it is superb!!! No lag and buttery smooth... Besides that, there are a few upgrade that are worth upgrading for... Tempting!!! Very tempting... Guess I will put this on hold first till I decide which custom ROM to upgrade to!!! Will do some survey on which is the best Jelly Bean ROM out there now!!! Till then...

Finally managed to get a used good condition rear parcel shelf for 'FrankenBenz'!!! I've been looking high and low for this i...

Finally managed to get a used good condition rear parcel shelf for 'FrankenBenz'!!! I've been looking high and low for this item ever since I decided to start 'Project FrankenBenz'!!! This is the only part that betrays the age of 'FrankenBenz' and I can't wait to get rid of it...


The first aid compartment is in very good condition... Everything is still intact...


This rear parcel shelf is from a newer model and it is slightly different compare to the one on 'FrankenBenz'...


As you can see from this pic, the speaker cover is in dire state... Notice the different in design??? The new one is definitely better looking!!!


Last time, the mechanic relocate the speaker because the original place can only fit in a 5" speaker while the new one is 6" (better sounding and much easier to source!!!)... This time I insist that the speaker must be in the original place but the magnet can't go through it!!! With some brute force and the help of a plier and hammer, we manage to bend the metal surrounding the speaker area and make the hole just big enough for the magnet to go through... Use some extremely sticky tape and tape the speaker in place... Viola very clean and nice looking rear parcel shelf!!!




To be continue...

OMG I can't believe it as I'm going to all the baby fair that I knew... In fact I just came back from 'IBEX' which stands f...

OMG I can't believe it as I'm going to all the baby fair that I knew... In fact I just came back from 'IBEX' which stands for 'International Baby Expo' and I'm pretty disappointed with it... No doubt it was much nicer to walk compared to the one in 'Mid Valley' a fortnight ago (Mid Valley one was cramped and all of us looked like packed sardines!!!)... But the problem is, almost all the exhibitionist are the same... So there are nothing much for us to buy...

We were interested in stem cell storing and wanted to have some in-depth understanding hence we approached two of the companies... One of them is 'Cyrocord' and the other is 'Cellsafe'... The most famous one is absent from this fair!!! After hearing both out, both of us are getting really confuse on which to choose... Both have their pros and cons... So we ended up leaving without signing up with either one... Since we still have time, we decided to do more research on this... Whoever have experience on this please feel free to leave some comments!!! 

Okay I admit that after watching 'The Dark Knight Rises', I have no expectation from 'The Amazing Spiderman' because I k...


Okay I admit that after watching 'The Dark Knight Rises', I have no expectation from 'The Amazing Spiderman' because I know how hard it is to better the former (i still can't get over 'The Dark Knight Rises'!!! it is just awesome to the max)... And you know what, that's the correct things to do as 'Spidey' is as predictable as 'RTM1' (you will only know this if you live in 'Malaysia') which is boring all the way... 

If compare apple to apple, this new version of 'Spidey' is in fact much better compare to the older version... The reason for this is simple... More humorous and better looking chicks!!! If they are planning to film 'Spidey 2', lot of works need to be done especially the storyline which is lacking in almost all superheroes movie...

Did I talked about the screeching sound emitting from 'FrankenBenz' in my previous post??? I did talked about the inability for i...

Did I talked about the screeching sound emitting from 'FrankenBenz' in my previous post??? I did talked about the inability for it to rev pass 4000rpm occasionally... Before this happened, 'FrankenBenz' started to have some really strange noise and it only occurred occasionally... So I did not pay much attention to it... Bad idea!!! Really bad idea as I found it the hard way...

I was on my way back from work and I stopped by a petrol station to feed my hungry 'FrankenBenz' (which is always hungry for petrol!!!) and everything went fine until I started my car... I heard a loud 'klong' sound and my voltmeter reading drop from the usual 14.++ to around 11.++... I quickly stopped my car and pop the hood... To my horror, the whole alternator sits on the radiator piping!!!


There, the alternator rest on top of the bottom radiator piping!!! How the hell the alternator managed to drop is beyond me... But after some inspection I found the culprit!!! Culprit for the screeching sound as well as why the alternator managed to come loose... The screeching sound came from the belt turning the waterpump, aircond compressor, crank shaft pulley, alternator as well as power steering... As the alternator came loose, it's position is off and it cause the belt to slip and screech... 

As for why the alternator drop is really simple... The alternator is screw to a bracket from the waterpump and the bracket decided to snap and this cause the alternator to drop... So in order to fix the alternator back, I will first need to replace my waterpump which is still in very good condition!!!

Luckily I was at the petrol station when this happened!!! And I'm really lucky as the petrol station attendant gave me a foreman number (my foreman refuse to come to my aid as I'm too far away and he told me to tow my car back to his workshop!!!) and I got nothing to lose and gave the number a call... After explaining it to him, he said that he was able to help me... Luckily this does not happen a day later as I'm going outstation the very next day!!! 


This foreman have no prior experience with 'Toyota 1JZ-GTE' engine but he have vast experience on 'BMW'... In order to take out the waterpump, basically the whole front part of the engine needs to be dismantle!!! Everything including the radiator up till the cam pulley!!! I don't know what the 'Japanese' is thinking when they designed the '1JZ-GTE' as the amount of work needed to take out the waterpump is mind boggling!!! I really appreciate this foreman that came to my aid as the amount of work needed would definitely put a lot of people off... If I'm the foreman, I will definitely ask it to be tow as this is not a job that can be finish in an hour time... But the foreman is professional enough to finish the task at the side of the petrol station!!! 


It took the foreman more than five hours to finish the job!!! By the time I reach home, it was already 12am in the midnight!!! I'm really grateful for the foreman as he did an excellent job reviving my 'FrankenBenz'!!! Now 'FrankenBenz' is back boosting happily...